Double Row Terminal Block

(1 customer review)

$6.25$9.25 (USD)

  • Double row screw terminals with barriers
  • Easy to connect screw terminals, wire 22-14 ga
  • Tin-plated brass terminals, nickel-plated steel screws with bolt-size #6 (M3.5 metric)
  • Used in for industrial, electrical, electronic, and automotive projects
  • Packaged includes a single block
BULK ORDERS – please contact support@mgispeedware.com for availability.
BULK ORDERS – please contact support@mgispeedware.com for availability.
SKU: TS-2RX Category:

Description

Why buy screw terminal barrier strips
easily connect, swap, or replace your wires using screw terminals

double row screw terminal strip sizes

EASY INSTALLATION

After mounting the terminal strip in your location of choice, wiring is a straightforward task with either ring or fork crimp terminals. Screw terminal can accommodate connector with ring / fork diameter up to 8mm wide.

VERSATILE

The double row strip is fully insulated, can accommodate wire up to #12 AWG, and has all screw terminals on top. Alternatively, the single row strip is designed for through-panel connections and should be mounted overtop an appropriate sized cutout.

HIGH QUALITY

Both single and double row terminal strips are built to last. Designed to withstand temperatures up to 105°C, with high-quality tin-plated brass terminals and nickel-plated steel screws. Whether you need single or double row blocks, you’ll get no-nonsense screw terminals that offer superior connection.

Junction block specifications
everything you need to know about our screw terminal strips

Pin Pitch: 9.525mm
Wire Range: 22 – 12 AWG
Temperature Rating: -40°C to 105°C (-40°F to 221°F)
Insulation Resistance: 500 MΩ
Withstand Voltage:Double Row: AC2000V/Min
Housing: PA66, UL-94V-0
Rated Voltage/Amps:Double Row: 300V / 20A
Terminals: Brass, Tin-plated
Screws: Steel, Nickel-plated
Torque:Double Row: 0.5 N*m, 4.4 LB*in

1 review for Double Row Terminal Block

  1. Jay H. (verified owner)

    MGI has all of the little, specialty stuff that I could not find anywhere else. MGI supplied 95% of all hardware I used to rewire the entire electrical system on my ’71 AMC Hornet. Great guys (Raymond and Marcel). Highly recommended. Probably not the cheapest vendor, but certainly the best that I could find worldwide. Quality stuff and quality customer service/support.

    Image #1 from Jay H.
Add a review

Your email address will not be published. Required fields are marked *

Before finalizing your purchase

It is important to familiarize yourself with the MGI panel Installation Manual. Not only does this help you to select the appropriate options for your race panel, it will enable you to tackle any troubleshooting issues with confidence.