Simple Style, Simple Controlwhat makes a 4 duckbill panel special
Insert, tighten, and connect. Duckbill toggles are easily inserted into the switch board mounting hole and fastened using the supplied plastic nut. Then, the 3 pin spade terminals allow for quick connections to your loads. Simply feed some wire from your loads and power source, crimp on and attach the supplied terminals, and mount the duckbill board wherever you need it.
Simple ON/OFF actuation. The lighted duckbill toggle has spade terminals for easy wiring. The SPST 3 pin design has a source input, a load output, and a ground for the incandescent bulb. The switch illuminates when the actuator is ON.
Duckbills are among the shortest toggle switches, measuring only 0.472” in body width and 1.17” in body length, with a handle measuring 0.70” from the top of the switch’s mounting threads. The entire switch, including the duckbill toggle and spade terminals, is only 2.075” in length.
WHAT’S INCLUDEDwhat comes with every push button duckbill toggle board
Stainless steel faceplates are lightweight and laser cut for guaranteed precision and fit. Your duckbill switch board has five circular cutouts and six pre-drilled mounting holes for quick installation. Manufactured in North America, MGI faceplates are designed with quality in mind.
Premium switches can be used to control incandescent lighting and fully resistive loads. Each ON/OFF maintained duckbill switch is rated 15A while the momentary (ON)/OFF LED push button is rated 3A. Whenever you install this modern, blue angel-eye push button, be sure to use a relay to control any load.
Illuminated toggles are available in four popular colors: red, blue, green, and amber.
Jumpers & Crimp terminals are supplied so that you don’t have to guess what fits.